Installation Guide

Add-On Effects Installation Guide
8
17 Select [Authorize], [Get access key from
authentication server], then [Have already
created registration code], then click [Next].
The following window opens.
18 Click [Read from file] to read the text file saved
in Step 13.
If you wrote down the ID and code on a piece of paper,
enter the ID and code from the keyboard.
19 Make sure that the correct PRODUCT ID and
registration code are displayed, then click
[Next].
The window indicates “To get access key, get ready to
connect to the Internet and click [Next].”
20 Make sure that you are prepared to access the
Internet, then click [Next].
The computer connects to the authentication server and
obtains the access key.
21 When the access key is obtained, the following
window opens:
22 Select [Save access key to write into console
later.], then click [Next].
The following window opens.
23 Click [Save in file] to save the access key as a
text file.
You can also write down the access key displayed on the
screen.
24 Copy the saved text file to the computer (#1)
that is connected to the console.
Follow the steps below on computer #1.
25 Start the installer, select [Authorize], then [Have
already obtained access key], then click [Next].
The following window opens.
26 Click [Read from file] to read the text file saved
in Step 23.
27 Make sure that the correct access key is
displayed, then click [Next].
The I/O port setting window opens.
28 Make sure that the I/O ports specified in Step 9
are selected, then click [Next].
A window indicating the installation progress opens, and
the Add-On Effects package is installed.