Specifications

Effect Parameter List
258 Appendix • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Effect Parameter List
This section explains the meaning of each parameter in each effect.
The tables give the parameter number, the range of settings (or selections), and the explanation.
(“@” marked parameters have no effect even if a program controller is assigned to the function)
1: DIGITAL SCRATCH
1 Input Level 0 — 127 Scratch depth
2 Initial Delay 0.1 — 460.0ms Delay time
3 Scratch Speed 1 — 127 Scratch modulation frequency
4 Scratch Depth 0 — 127 Scratch modulation depth
5 Auto Pan Speed 0.00Hz — 39.7Hz Autopan frequency
6 Auto Pan Depth 0 — 127 Autopan depth
7 EQ Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
8 EQ Gain -12 — +12dB Gain by which the EQ will boost/cut the mid range
9 EQ Width 1.0 — 12.0 Width of the mid range area boosted/cut by the EQ
10 HPF Frequency thru, 20Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
11 Dry/Wet Balance D63>W — D=W — D<W63 Balance between dry sound and effect sound
2: AUTO SYNTH
1 Mod Speed 0 — 127 Modulation speed
2 Mod Wave Type TypeA,TypeB,TypeC,TypeD Modulation type
3 Mod Depth 0 — 127 Modulation depth
4 Mod Depth Ofst R -64 — +63 R ch offset relative to modulation depth
5 LPF Frequency 1.0kHz — 18.0kHz,thru Frequency at which the low pass filter will cut the high range
6 HPF Frequency thru,22Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
7 Dry Mix Level 0 — 127 Add dry sound before the delay input
8 Delay Time 0.1 — 370.0ms Delay time
9 Delay Time Ofst R 0 — -884 Delay time offset for the R ch offset
10 Feedback Level -63 — +63 Feedback amount
11 FB Level Ofst R -63 — +63 Feedback offset for the R ch
12 Delay Level 0 — 127 Delay level
13 AM Speed 0 — 127 Modulation frequency
14 AM Wave tri,sine,saw up,saw down Select modulation waveform
15 AM Depth 0 — 127 Amplitude modulation depth
16 AM Inverse R normal,inverse Left/right phase reversal of the amplitude modulation signal
3: TECH MODULATION
1 Mod Speed 0 — 127 Modulation speed
2 Mod Depth 0 — 127 Modulation depth
3 Pre Mod HPF Freq thru, 20Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
4 Mod Gain -12 — +12dB Gain of the modulation signal
5 Mod LPF Frequency 1.0kHz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
6 Mod LPF Resonance 1.0 — 12.0 Resonance of the low pass filter
7 Mod Mix Balance D63>W — D=W — D<W63 Balance between the effect sound and the dry sound before the delay input
8 Delay Time 0.1 — 740.0ms Delay time
9 Delay Time Ofst R 0 — -884 Delay time offset for the R ch
10 Feedback Level -64 — +63 Feedback amount
11 FB Level Ofst R -64 — +63 Feedback offset for the R ch
12 Feedback High Damp 0.1 — 1.0 Adjust the high range attenuation (lower values will cause the high range to decay faster)
13 FB Hi Damp Ofst R -0.9 — +0.9 High Damp offset for the R ch
14 Dry/Wet Balance D63>W — D=W — D<W63 Balance between the dry sound and effect sound
4: NOISY MOD DELAY
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance between the dry sound and the effect sound
2 Mod Speed 0 — 127 Delay modulation frequency
3 Mod Wave Type Type-A, Type-B, Type-C, Type-D Modulation type
4 Mod Depth 0 — 127 Modulation depth
5 Delay Time 0.1ms — 650.0ms Delay time
6 Feedback Level -63 — +63 Feedback amount
7 Mod Mix Balance 1 — 127 Balance between delay sound and delay bypass sound
8 EQ High Gain -12dB — +12dB Gain by which the EQ will boost/cut the high range
9 HPF Frequency thru, 20Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
5: NOISE AMBIENT
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance between dry sound and effect sound
2 Mod Speed 0 — 127 Modulation speed
3 Mod Depth 0 — 127 Modulation depth
4 Noise Level 0 — 127 Level of noise component
5 LPF Frequency 1.0kHz — 18.0kHz,thru Frequency at which the low pass filter will cut the high range
6 Dry Mix Level 0 — 127 Pre-delay dry level
7 Delay Time 0.1 — 370.0ms Delay time
8 Delay Time Ofst R 0 — -884 Delay time offset for the R ch
9 Feedback Level -63 — +63 Feedback amount
10 Dry Level 0 — 127 Delay level
11 AM Speed 0.0Hz — 39.70Hz Modulation frequency
12 AM Wave tri,sine,saw up,saw down Modulation waveform selection
13 AM Depth 0 — 127 Depth of amplitude modulation
14 AM Inverse R normal,inverse Invert left/right phase of amplitude modulation signal