Service manual

6-16
1
2
3
4
5
6
7
8
9
A
TIP:
Remove the bearing and oil seals using a
press.
Driven coupling check
1. Check the driven coupling and driven
coupling damper. Replace if damaged or
worn.
Bearing and oil seals installation
1. Install the oil seals and bearing.
TIP:
Install the bearing using a press.
2. Install the oil seal.
Intermediate drive shaft installation
1. Install the intermediate drive shaft.
TIP:
Install the intermediate drive shaft using a
press.
Intermediate drive shaft extension
installation
1. Install the intermediate drive shaft exten-
sion.
Driver rod LS: 90890-06606
Bearing outer race attachment:
90890-06628
Driver rod LS: 90890-06606
Ball bearing attachment: 90890-06631
Distance a:
14.2 ± 0.2 mm (0.56 ± 0.01 in)
Driver rod LS: 90890-06606
Ball bearing attachment: 90890-06631
a
a
Distance a:
6.2 ± 0.2 mm (0.24 ± 0.01 in)
Distance a:
56.8 ± 0.2 mm (2.24 ± 0.01 in)
Drive shaft holder 5: 90890-06519
Width a: 27 mm (1.06 in)
a
a
Intermediate drive shaft assy.