Operation Manual

Internal Effects 119
02R User’s Guide
Program 22 — DELAY–>EARLY REF
This effect creates early reflection sound after a delay.
Parameter Setting Range Description
Delay 256.0ms 0.1–320.0ms Delay time.
FB.Gain +43% –99 to +99% Feedback gain. The amount of signal returned to the effect.
Hi.Ratio 0.3 0.1–1.0 High frequency decay ratio.
Type Random ER type Choose S-Hall, L-Hall, Random, Reverse, Plate, or Spring.
RoomSize 6.8 0.1–20 Time interval between the early reflections.
Liveness 40–10 Rate at which reflected sounds fade or decay.
Diff. 30–10 Reverb diffusion.
Ini.Dly 8.0ms 0.1–200.0ms Initial delay between the direct sound and early reflections.
ER Num. 12 1–15 Number of early reflections.
Depth 47% 0–100% Reverb depth. The amount of reverb.
Program 23 — DELAY L-C-R 1
A three-part delay with independent delay time parameters for left, right, and center.
Parameter Setting Range Description
Dly(L) 125.0ms 0.1–1000.0ms Left channel delay time.
Dly(R) 250.0ms 0.1–1000.0ms Right channel delay time.
Dly(C) 500.0ms 0.1–1000.0ms Centre channel delay time.
Level(C) +57 –100 to +100 Centre delay volume level.
FB.Dly 125.0ms 0.1–1000.0ms Feedback delay. The delay time before feedback starts.
FB.Gain +20% –99 to +99% Feedback gain. The amount of signal returned to the effect.
Hi.Ratio 0.8 0.1–1.0 High frequency decay ratio.
LPF THRU 1.0kHz–THRU Low pass filter cutoff frequency.
HPF THRU THRU–8.0kHz High pass filter cutoff frequency.
Ini.Dly 0.1ms 0.1–320.0ms Initial delay between the direct sound and early reflections.
Program 24 — DELAY L-C-R 2
This is a variation on program 23.
Parameter Setting Range Description
Dly(L) 250.0ms
Same as program 23 Same as program 23
Dly(R) 500.0ms
Dly(C) 1000.0ms
Level(C) +57
FB.Dly 1000.0ms
FB.Gain +17%
Hi.Ratio 0.8
LPF THRU
HPF THRU
Ini.Dly 0.1ms