Operation Manual

118 Internal Effects
02R User’s Guide
Program 19 — EARLY REF.2
This is a variation on program 18. It produces a thicker sound.
Parameter Setting Range Description
Type S-Hall
Same as program 18 Same as program 18
RoomSize 2.0
Liveness 7
Diff. 7
Ini.Dly 4.8ms
ER Num. 15
Hi.Ratio 0.8
FB.Gain 0%
LPF 11.0kHz
HPF THRU
Program 20 — GATE REVERB
Simulates a gate reverb effect by using the EARLY REFLECTION program.
Parameter Setting Range Description
Type Type-B Type-A, Type-B Type of reflections
RoomSize 1.9 0.1–20.0 Time interval between the early reflections.
Liveness 80–10 Rate at which reflected sounds fade or decay.
Diff. 70–10 Reverb diffusion.
Ini.Dly 0.1ms 0.1–200.0ms Initial delay between the direct sound and early reflections.
ER Num. 15 1–15 Number of early reflections.
Hi.Ratio 0.8 0.1–1.0 High frequency decay ratio.
FB.Gain 0% –99 to +99% Feedback gain. The amount of signal returned to the effect.
LPF 12.0kHz 1.0kHz–THRU Low pass filter cutoff frequency.
HPF THRU THRU–8.0kHz High pass filter cutoff frequency.
Program 21 — REVERSE GATE
This is a variation on program 20. It creates somewhat strange, reversed gate reverb sound.
Parameter Setting Range Description
Type Type-A
Same as program 20 Same as program 20
RoomSize 2.8
Liveness 8
Diff. 5
Ini.Dly 0.1ms
ER Num. 15
Hi.Ratio 0.8
FB.Gain 0%
LPF 12.0kHz
HPF THRU