SUBWOOFER SYSTEM YST-MSW10 Active Servo Technology ACTIVE SERVO PROCESSING SUBWOOFER SYSTEM YST-MSW10 POWER HIGH CUT HIGH LOW VOLUME OWNER’S MANUAL MANUAL DE INSTRUCCIONES Active Servo Technology
CAUTION RISK OF ELECTRIC SHOCK DO NPT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with the arrowhead symbol within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SAFETY INSTRUCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 4 Follow Instructions – All operating and other instructions should be followed.
System Example / Ejemplo del sistema Personal Computer Personal Computer Portable CD Player Portable CD Player or or Speaker System with Connecter for Subwoofer YST-MSW10 ACTIVE SERVO PROCESSING SUBWOOFER SYSTEM YST-MSW10 LINE 1 Actve Servo Technology POWER 1 HIGH CUT INPUT VOLUME IN HIGH LOW POWER 2 PRESENCE VOLUME Actve Servo OUT TO LEFT SPEAKER Technology OUTPUT (ADJ. VOL) DC 9V YST-M10 Speaker System with Built-in Amp.
Front Panel & Rear Panel / Panel delantero y Panel trasero ACTIVE SERVO PROCESSING SUBWOOFER SYSTEM YST-MSW10 LINE 2 LINE 1 L IN R OUT 3 1 2 4 Active Servo Technology POWER HIGH CUT 5 HIGH LOW VOLUME 6 MADE IN MALAYSIA V844750-1 UC 2
Thank you for purchasing a Yamaha YST-MSW10 Subwoofer System. Yamaha’s Active Servo Technology offers exceptional high performance. Cautions Please read the following operating precautions before use: • When disconnecting the power cord from an AC receptacle, hold and pull the plug, not the cord. • If the YST-MSW10 is not going to be used for a while, disconnect it from the AC receptacle. • Since this unit has a built-in power amplifier, heat will radiate from the rear panel.
Specifications Front Panel (Refer to page 2) Type Active Servo Processing Subwoofer System Amplifier output 25 W/4 Ω (THD 10%, 100 Hz) High-Cut Filter Low, High Pressure Level 98 dB (max.) 4 POWER Switch and Indicator: Press to power on the YST-MSW10; the power indicator will light up. Press again to power off. Before powering on and off, turn down the VOLUME control. 5 HIGH CUT Switch: This switch selects the high-cut filter frequency: Set it to either LOW or HIGH.
