User Manual

Studio Manager V2 Installation Guide (for DM2000/02R96)
4
System Hookup
The following illustration shows the available hookup methods
you can use to connect your Yamaha mixing console to your
computer: serial, USB, MIDI.
Configuring Your Yamaha Mixing
Console
Press the DISPLAY ACCESS [SETUP] button to open the MIDI/
TO HOST Setup page. Under “Studio Manager,” select a port
and assign an ID to your Yamaha mixing console. If you are
using a serial connection, set the TO HOST SERIAL options as
appropriate (i.e., “PC-2” for a Windows PC, or “Mac” for a
Macintosh computer).
Acrobat Reader
To view the PDF manuals included on the CD-ROM, you need
to install the Adobe Acrobat Reader software. If you already have
this software installed, skip this section.
1 Start your computer and Windows, and then
insert the included CD-ROM into your computer’s
CD-ROM drive.
2 Double-click the “Acroread_” folder on the
CD-ROM.
This folder contains Acrobat software in several languages.
3 Double-click the folder of the language version
you want to install.
4
If you want to install the English language version,
double-click “ar***enu.exe.” (“***” represents the
software version. The name of the installer depends on the
language you select.)
5 Follow the on-screen instructions to install the
software.
For instructions on using Acrobat Reader, choose Reader
Help from Acrobat Reader’s [Help] menu.
USB MIDI Driver
If you are connecting your Yamaha mixing console to a USB
port on your computer, you’ll need to install the Yamaha USB
driver. If you already have this driver installed, skip this section.
The procedure you use for installing the Yamaha USB driver
depends on which version of Windows you’re using:
• Windows 98 & 98SE: See page 5
• Windows Me: See page 6
• Windows 2000: See page 6
• Windows XP: See page 7
NOTE: Before you connect to serial or MIDI ports, turn off your
Yamaha mixing console and computer.
Warning: Do not set the TO HOST SERIAL option to “Mac” while
your Yamaha mixing console is connected to your computer’s serial
port. Doing so may damage your computer.
USB cable
(Yamaha CCJ-Mac
or equivalent)
(Yamaha CCJ-PC2
or equivalent)
USB port
Serial cable
Mac serial port
PC serial port
Yamaha mixing console rear panel Mac or PC
MIDI interface
MIDI cables
3. MIDI
2. USB
1. Serial
(DM2000/02R96 only)
TO HOST
USB
INOUT
Windows Installation
NOTE: Studio Manager is supported by only Windows 2000/XP.
NOTE: Install the driver for Windows 98/98SE/Me before installing
other MIDI applications.
Studio
Manager
DM2000/02R96
Computer
USB cable
Driver