User Manual

Studio Manager V2 Installation Guide (for DM2000/02R96)
17
ENGLISH
Other Functions
Copy & Paste Function
You can copy and paste not only the characters but the control positions in Studio Manager.
In the Console Setup window (page 14), you can also specify the parameters to be copied.
The following table describes how to use the Copy & Paste function.
Resetting to the default value (Ctrl ( ) + click)
Move the cursor to a control or a parameter value, then hold down the <Ctrl> key ( ) and click the
mouse button to reset the value to the default (e.g., to reset an Input Channel fader to –∞, or reset a
pan setting to Center).
Ctrl( )+Shift+Click
Move the cursor to a fader or AUX Send control, then hold down the <Ctrl> key ([ ]) and <Shift>
key and click the mouse button to reset the value to the nominal level.
Copying characters Select copy source characters, right-click (<control>+click), then choose [Copy].
Pasting characters
Move the cursor to the copy destination, right-click (<control>+click), then
choose [Paste].
Copying a channel Right-click (<control>+click) a copy source channel, then choose [Copy].
Pasting a channel Right-click (<control>+click) the copy destination channel, then choose [Paste].