User Manual

Studio Manager V2 Installation Guide (for DM2000/02R96)
13
ENGLISH
Configuring the Editor
You must configure the following settings for each open Editor.
System Setup
To open the Setup window, choose [System Setup] from the [File] menu.
Be sure to specify the Input port and Output port.
Input port/Output port: These pop-up menus are used to select the ports through which Studio
Manager will communicate with your Yamaha mixing console.
Console Device ID: Studio Manager can control any one of up to eight Yamaha mixing consoles,
each with its own exclusive ID. Select the ID of the console you want to control.
Channel Select: These options determine whether or not channel selection is linked. When the
PC->Console option is on, selecting a channel in Studio Manager selects the same channel on the con-
sole. When the Console->PC option is on, selecting a channel on the console selects the same channel
in Studio Manager.
Confirmation: These options determine whether or not a confirmation dialog box appears when
storing, recalling, or patching.
Layer Select: These options determine whether or not Layer selection is linked. When the
PC->Console option is on, selecting a Layer in Studio Manager selects the same Layer on the console.
When the Console->PC option is on, selecting a Layer on the console selects the same Layer in Studio
Manager.
Window Control from Console: This option determines whether or not using the USER
DEFINED KEYS on the console enables you to remotely open and close the Studio Manager windows.
Note: Specify a MIDI port (page 11) before making the following settings.
Note: Select the same MIDI ports that you specified in Step 3 as described on page 11.
Macintosh System Setup windowWindows System Setup window