User Manual

Appendices
80
• LMY4-AD
1. GENERAL SPECIFICATIONS
Output impedance of signal generator: 150Ω, fs=44.1k or 48kHz.
Frequency Response 20Hz-20kHz, refer to the nominal output level @1kHz
Gain Error @1kHz
Total Harmonic Distortion
Dynamic Range
* Dynamic range are measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite dB/octave attenuation.
Crosstalk @1kHz
INPUT OUTPUT
CONDITIONS
MIN TYP MAX UNITS
CH1–4 LMY4-DA @+10dB –2 1 dB
INPUT OUTPUT
CONDITIONS
MIN TYP MAX UNITS
CH1–4 LMY4-DA @+10dB –1 1 dB
INPUT OUTPUT
CONDITIONS
MIN TYP MAX UNITS
CH1–4 LMY4-DA
+10dB@20Hz–20kHz 0.02 %
full scale output @1kHz 0.007 %
INPUT OUTPUT
CONDITIONS
MIN TYP MAX UNITS
CH1–4 LMY4-DA * 120 dB
INPUT TO/FROM
CONDITIONS
MIN TYP MAX UNITS
CH N CH (N-1) or (N+1) adjacent input –90 dB