User Manual
Appendices
32
• DELAY + REV [Type: MIX]
*1
• Delay Time is calculated from the [TEMPO] and [NOTE].
• DELAY ➔ REV [Type: MIX]
*1
• Delay Time is calculated from the [TEMPO] and [NOTE].
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
delay time
DELAY L 0.0 - 4000.0 Left channel delay time
NOTE L *1 Used in conjunction with TEMPO to determine delay time
DELAY R 0.0 - 4000.0 Right channel delay time
NOTE R *1 Used in conjunction with TEMPO to determine delay time
FB.LEVEL –99 - +99 [%]
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
FB.DELAY 0.0 - 4000.0 Feedback delay time
NOTE FB. *1 Used in conjunction with TEMPO to determine delay time
DELAY HIGH 0.1 - 1.0 High-frequency feedback ratio
REV:DELAY BAL. 0 - 100 [%] Delay and reverb balance (0%= reverb, 100%= delay)
REVERB TYPE
Small Hall, Large Hall, Vocal Plate,
Perc.Plate, Spring, Echo Room,
Strings, Snare, Reverb Flange
Reverb type
REV TIME 0.3 - 99 [s] Reverb time
INI.DELAY 0.0 - 500.0 [ms] Initial delay before reverb begins
HI.RATIO 0.1 - 1.0 Reverb time for high-frequency portion
DENSITY 0 - 100 [%] Reverb density
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
delay time
DELAY L 0.0 - 4000.0 Left channel delay time
NOTE L *1 Used in conjunction with TEMPO to determine delay time
DELAY R 0.0 - 4000.0 Right channel delay time
NOTE R *1 Used in conjunction with TEMPO to determine delay time
FB.LEVEL –99 - +99 [%]
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
FB.DELAY 0.0 - 4000.0 Feedback delay time
NOTE FB. *1 Used in conjunction with TEMPO to determine delay time
DELAY HIGH 0.1 - 1.0 High-frequency feedback ratio
REV-DELAY BAL. 0 - 100 [%]
Delay and delayed reverb balance (0% = delayed reverb,
100% = delay)
REVERB TYPE
Small Hall, Large Hall, Vocal Plate,
Perc.Plate, Spring, Echo Room,
Strings, Snare, Reverb Flange
Reverb type
REV TIME 0.3 - 99 [s] Reverb time
INI.DELAY 0.0 - 500.0 [ms] Initial delay before reverb begins
HI.RATIO 0.1 - 1.0 Reverb time for high-frequency portion
DENSITY 0 - 100 [%] Reverb density
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
3
3
3
3
3
3
3
3