User Manual
Effects Parameters
27
• DUAL PITCH [Type: STEREO]
*1
• Delay Time is calculated from the [TEMPO] and [NOTE].
• REV + CHORUS [Type: MIX]
*1
• FREQ. is calculated from the [TEMPO] and [NOTE].
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
delay time
PITCH L –24 - +24 Left channel pitch shift
FINE L –50 - +50 [ct] Left channel pitch shift fine
LEVEL L –100 - +100 [%]
Left channel level (plus values for normal phase, minus
values for reverse phase)
PITCH R –24 - +24 Right channel pitch shift
FINE R –50 - +50 [ct] Right channel pitch shift fine
LEVEL R –100 - +100 [%]
Right channel level (plus values for normal phase, minus
values for reverse phase)
DELAY L 0.0 - 1000.0 [ms] Left channel delay time
NOTE L *1 Used in conjunction with TEMPO to determine delay time
FB.LEVEL L –99 - +99 [%]
Left channel feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
DELAY R 0.0 - 1000.0 [ms] Right channel delay time
NOTE R *1 Used in conjunction with TEMPO to determine delay time
FB.LEVEL R –99 - +99 [%]
Right channel feedback gain (plus values for normal-
phase feedback, minus values for reverse-phase feed-
back)
HI.RATIO 0.1 - 1.0 High-frequency feedback ratio
MODE 1 - 10 Pitch shift precision
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
modulation speed
REVERB TYPE
Small Hall, Large Hall, Vocal Plate,
Perc.Plate, Spring, Echo Room,
Strings, Snare, Reverb Flange
Reverb type
REV TIME 0.3 - 99 [s] Reverb time
INI.DELAY 0.0 - 500.0 [ms] Initial delay before reverb begins
HI.RATIO 0.1 - 1.0 Reverb time for high-frequency portion
DENSITY 0 - 100 [%] Reverb density
FREQ. 0.05 - 40.00 [Hz] Modulation speed
NOTE
Used in conjunction with TEMPO to determine modulation
speed
DEPTH 0 - 100 [%] Modulation depth
MOD DELAY 0.0 - 500.0 [ms] Modulation delay time
WAVE Sine, Tri Modulation waveform
CHO:REV BAL. 0 - 100 [%] Reverb and chorus balance (0%= chorus, 100%= reverb)
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
3
3
3
3
3
3
3