User Manual

OUT CH VIEW (output channel view) function
117
OUT PATCHOUT INSERTOUT EQOUT COMPOUT DELAY
OUT DCA/MUTE
MATRIX/STOUT CH VIEW
• RESET BOTH
The parameters of both channels will be reset to the
default settings.
The channel parameters that are copied/reset when
you click one of the above buttons are limited to the
parameters that are linked when paired. In addition
to the channel parameters, the following settings
will also be copied/reset.
• Solo/Cue on/off status
• Solo Safe on/off status
• Recall Safe on/off status
• Mute Safe on/off status
3. To pair the channels, click the MIX A to B button,
the MIX B to A button (a channel number will
appear in A and B), or the RESET BOTH button. If
you decide not to specify pairing, click the CANCEL
button.
Hint
You can also enable/defeat pairing by pressing the
[SEL] switches of two adjacent input channels on the
console.
Defeating pairing
1. Select one of the functions OUT EQ, OUT COMP,
OUT DELAY, MATRIX/ST, OUT CH VIEW, or
METER, and access the screen for the channel that
you wish to pair.
2. Click the heart symbol for the channels that you
wish to un-pair.
A popup window will appear, asking you to confirm
that you wish to defeat pairing.
3. To defeat, click the OK button. If you decide not to
defeat pairing, click the CANCEL button.
Hint
You can also enable/defeat pairing by pressing the
[SEL] switches of two adjacent input channels on the
console.