User Manual

OUT DCA/MUTE (output DCA/mute) function
103
OUT PATCHOUT INSERTOUT EQOUT COMPOUT DELAY
OUT DCA/MUTE
MATRIX/STOUT CH VIEW
MUTE GROUP ASSIGN
[Function]
Assign output channels to mute groups 9–12.
■ Console
In the LCD FUNCTION ACCESS
block, press the OUTPUT [DCA/
MUTE] switch (press repeatedly
until the screen shown at the right
appears)
■ Display
MENU button → OUTPUT DCA/
MUTE button → MUTE GROUP
ASSIGN tab
[Screen functions]
1 MODE
From the two choices listed below, select the function
of the SCENE MEMORY [1]–[12] switches located
in the SCENE MEMORY block of the console.
This is linked with the MODE button located in the
IN DCA/MUTE function MUTE GROUP ASSIGN
screen, and also with the MODE button located in
the SCENE function DIRECT RECALL screen.
• DIRECT RECALL
The [1]–[12] switches can be used to directly recall
the scenes assigned to direct recall numbers 1–12.
(For the procedure of assigning a scene to a direct
recall number, →p.28.)
• MUTE MASTER
The [1]–[12] switches can be used to switch mute
on/off for mute groups 1–12.
1