User Manual

CS1D Reference Manual (Software)

3 Input functions

These buttons access functions for the input chan-

nels (monaural input channels, ST IN channels).

The content of each function is described below.

(The abbreviated function name shown in the dis-

play is given in parentheses.)

• PATCH (IN PATCH)

Assign input units to input channels (→p.118).

• HA/INSERT (IN HA/INSERT)

Make settings for the head amps of an analog input

card, and insertion settings for input channels

(→p.131).

• EQ (IN EQ)

Make EQ settings for input channels (→p.134).

• GATE/COMP (IN GATE/COMP)

Make noise gate and compressor settings for input

channels (→p.139).

• DELAY (IN DELAY)

Make delay settings for input channels (→p.148).

• DCA/MUTE (IN DCA/MUTE)

Assign input channels to DCA groups or mute

groups (→p.150).

• PAN/ROUTING (PAN/ROUTING)

Make pan/routing settings for input channels. Here

you can also switch the MIX bus type (FIX or VARI)

(→p.154).

• CH VIEW (IN CH VIEW)

Here you can view the parameters for a single input

channel. You can also edit the channel parameters

(→p.162).

4 CANCEL

This button returns to the previous screen. When

you click this button, you will go back to the screen

that was displayed before you entered the menu

screen.