User Manual

1
Thank you for purchasing the CS1D.
This document explains the functionality that been added or changed in PM1D system software version 1.25.
Change in how fade-time process-
ing of each channel is defeated
Up through PM1D system software v1.2, operating a
fader while the fade time was being executed caused
fade-time processing for that channel to be cancelled.
However since it is easy to operate a fader inadvertently,
this version of the software disables this automatic can-
cellation, in order to prevent accidents.
If you want to cancel fade-time processing as before,
operate the fader while holding down one of the follow-
ing:
• The [SHIFT/GRAB] switch of the data entry block
• The [SHIFT] switch in the CHANNEL SELECT sec-
tion of the SELECTED INPUT CHANNEL block
• The [SHIFT] switch in the CHANNEL SELECT sec-
tion of the SELECTED OUTPUT CHANNEL block
Drag & drop effect data
(EFFECT ASSIGN screen)
In the EFFECT function EFFECT ASSIGN screen, you
can now use Drag & Drop to copy all settings of an
effect. Here’s how to do this.
1. In the EFFECT ASSIGN screen, click the effect type
graphic for the copy source internal effect (1–8),
and drag & drop it onto the graphic for the copy
destination internal effect.
A popup window will ask you to confirm the copy
operation.
2. To execute the copy, click the OK button. To cancel,
click the CANCEL button.
When you click the OK button, all parameters
including the effect type will be copied.
Reference pages
• Software section, page 12
Additions and changes to PM1D system software V1.25