User Manual

CS1D Operating Manual (Basic Operation)
112
• Detail of the CUE section
2. In the LCD FUNCTION ACCESS block, press the
[MON/CUE] switch several times to access the fol-
lowing MONITOR A screen.
• MONITOR A screen (MON/CUE function)
In the MONITOR A screen you can make various
settings related to the MONITOR A output. Here we
will specify the source that will be monitored when
the SOURCE [DEFINE] switch of the MONITOR A
section is pressed.
3. Use the buttons arranged in the DEFINE section of
the screen to select the source that will be moni-
tored when the SOURCE [DEFINE] switch is
pressed.
You can select from the following monitor sources.
• MIX 1–48 ........... Output signals of MIX buses 1–
48
• MATRIX 1–24.... Output signals of MATRIX buses
1–24
• 2TR IN 3–6 ........ Input signals from 2-TRACK IN
DIGITAL jacks 3–6 of the CS1D
console
Hint
In the MONITOR A screen you can also use func-
tions such as DIRECT IN to directly monitor the sig-
nal from a specific input jack, or COMM IN to
monitor the signal from a specific input jack via the
MONITOR A output when that signal exceeds a cer-
tain level. For details refer to “CS1D Reference Man-
ual (Software)”.
4. In the MASTER block MONITOR A section, press
one of the SOURCE [2TR IN 1]/[2TR IN 2]/[ST A]/
[ST B]/[DEFINE] switches to select the source that
you wish to monitor.
The following sources correspond to each switch.
• [2TR IN 1] switch.... The input signal from the 2-
TRACK IN DIGITAL 1 jack
or 2-TRACK IN ANALOG 1
jacks located on the CS1D
rear panel
• [2TR IN 2] switch.... The input signal from the 2-
TRACK IN DIGITAL 2 jack
or 2-TRACK IN ANALOG 2
jacks located on the CS1D
rear panel
• [ST A] switch ........... The output signal of the STE-
REO A channel
• [ST B] switch ........... The output signal of the STE-
REO B channel
•
[DEFINE] switch ....... The signal previously speci-
fied in the display (MON/
CUE function MONITOR A
screen)
5. Turn on the MONITOR A [ON] switch.
6. Use the MONITOR A [LEVEL] volume to adjust the
output level from the MONITOR OUT A jacks.
Alternatively, use the MONITOR A [PHONES] vol-
ume to adjust the output level of the PHONES
MONITOR A jack.
Hint
The MONITOR A [LEVEL] volume and MONITOR
A [PHONES] volume are independent.
CUE ACTIVE LED
LCD FUNCTION ACCESS
block
[MON/CUE] switch