Quickstart Guide

An ASSA ABLOY Group brand
Master PIN Code Setting
M
M
User PIN Code Registration
Register
Delete
Volume Setting
Language Setting mode
All Code Lockout Mode
**Network Module Setting
Join the network
High
English
Enable
Disable
Exit the network
Silent
Spanish
French
Low
U
Continue
Complete
Continue
Complete
Programming
Yale Real Living
Touchscreen Deadbolt Quickstart Guide
™
 *The Master PIN code must be registered prior
to programming the lock
 PIN codes can be 4 to 8 digits in length
 The key is used to enter or accept an entry,
and also to end a programming session
 The key is used either to enter or to continue
additional steps in a programming sequence
Features
Note: If the lock is connected to a network controller, it is recom-
mended that it is programmed through the centralized user interface
(PC or hand-held device) to ensure communication between the lock
and the controller unit.
**This function appears only with
RF network module installed.
1. Touch the screen with
the back of your hand
or fingers to activate
.
2. Enter the 4-8 digit Master
PIN code* followed by
the
key.
Lock Response: “Menu
mode, enter number, press
the
key to continue.”
*Default Master Pin Code must be registered
prior to any programming of lock.
Advanced Lock Settings
Automatic Re-lock
Enable
Disable
Inside Indicator Light
One Touch Locking
Enable
Disable
Enable
Disable
Privacy Button Setting
Handing the Lock
Enable
Disable
Performs automatic handing of
the lock
Continue
Complete
Open Door With PIN Code
1. Touch the screen with
the back of your hand
or fingers to activate.
2. Enter PIN code.
3. Touch the
key to confirm
the selection.
4. Unlock.
P/N AYRD220-INST-QUK Rev B
For more information go to: www.yalerealliving.com
3. Enter digit corresponding to the
function to be performed followed
by the
key.
Follow the voice commands.
4. Press the
key to
complete the process
and conclude the
programming session.
Note: If the lock is
connected to a controller,
it is recommended that it
be programmed through the
centralized user interface
(PC or hand-held device)
to ensure communication
between the lock and the
controller unit.
Default settings
in bold.