User Manual

15
P/N AYRD-120-STANDALONE-INST-FUL Rev B
Resetting Lock to Factory Default
When lock is reset to factory defaults all user codes
(including the Master PIN code*) are deleted and all
programming features are reset to original default settings
(see "Factory Default Settings").
1. Remove the battery cover.
2. Remove the batteries.
3. While pressing the reset button (minimum of 3 seconds)
reinstall batteries. Release reset button.
4. Replace battery cover.
Upon reset, Master Code creation is the only option
available and must be performed prior to any other
programming of the lock.
NOTE: After setting the Master Code, press any key to
complete handing of the lock.