Installation Sheet

P/N - Rev AYE HLINSTL
3
Install Exterior Handle & Interior Knob
4
Place exterior handle with stems and square
spindle into latch as shown.
Press tightly against door face.
After exterior handle is in position, install
interior knob and tighten screws.
On knob side of door install screw through
washer and into bottom hole and tighten
firmly.
Interior
Knob
M4x31.7mm
Square
Spindle
Stems
M4x20mm
5
Install Cylinder and Thumbturn
If necessary, turn cylinder tailpiece to horizontal
position.
Insert cylinder into escutcheon, through
deadbolt and into thumbturn.
With thumbturn and escutcheon flush against
door faces, install screws and tighten.
Note: Cylinder key hole must be in bottom
position.
Cylinder tailpiece must be in horizontal
position.
Thumbturn
Tailpiece
Escutcheon
M5x70mm