Full Product Manual

P/N YRD226-MNL-0001 Rev I
18
Setting Definitions
*The Master Entry Code must be created prior to any other programming of the lock.
Creation
required*
One Touch Locking
Enabled
Inside Indicator Light
Disabled (Off)
Settings
Default Setting
Master Entry Code
Auto Re-lock
Disabled
Volume
Enabled (Low)
Privacy Button
Disabled
All Code Lockout Mode
Disabled
Language English
Definition
The Master Entry Code is used for programming
and for feature settings. It must be created prior to
programming the lock. The Master code will also
operate (unlock/lock) the lock.
After a successful code entry or manual unlock
with the key, the lock will automatically re-lock after
each unlock in an effort to keep your home secure.
This feature is optional, and can be turned off.
In the ON mode, the lock will automatically re-lock
after thirty (30) seconds.
Located on the inside lock. Shows active status
(Locked) of lock and can be enabled or disabled in
Advanced Lock Settings (Main Menu selection #3).
When the latch is retracted, activating the keypad
will extend the latch (during Auto Re-lock duration
or when Auto Re-lock is disabled). When One-
Touch Re-lock is not in use (disabled), any valid
PIN code will re-lock the lock.
Privacy mode is disabled by default. Enable Privacy
mode by pressing the privacy button for 4 seconds
to put the lock in do-not-disturb mode (all pin
codes are disabled).
The volume setting for entry code verification is set
to Low (2) by default; otherwise it can be set to
High (1) or Silent (3) for quiet areas.
Choosing English (1), Spanish (2) or French (3)
becomes the (default) setting for the lock's voice
prompts.
This feature is enabled by the Master Entry Code.
When enabled, it restricts all user (except Master)
Entry Code access. When attempting to enter a
code while the lock is in All Code Lockout mode,
the RED locked padlock will appear on the screen.
Wrong Code Entry Limit
5 Times
After five (5) unsuccessful attempts at entering a
valid entry code, the lock will shut down and not
allow operation for sixty (60) seconds.
Shutdown Time 60 Seconds
The Lock will shutdown (flashing RED) for sixty
(60) seconds and not allow operation after the
wrong code entry limit (5 attempts) has been met.
Escape Return Mode
(YRD620 ONLY)
Disabled
When enabled Auto Re-lock is prohibited. Requires
door to be physically manipulated for lock to be re-
locked once door is open from the inside.