Application Guide

Yale Secure App
Quick Start Guide
For use with a Yale Assure Lock
®
with iM1 Network Module
For app quick start guides and manuals in other languages,
visit YaleHome.com/Support
Install the free Yale Secure app, available from the App
Store
SM
. This app is compatible with iPhone
®
, iPad
®
and
iPod touch
®
running iOS 10.3 and later. Create your
account once successfully downloading the app.
Step 1
Download the App
Step 2
Turn on Bluetooth
Yale Secure App
Ensure that your iPhone, iPad or iPod touch has
Bluetooth
®
turned on. This can be done with your
device settings.
After your Yale lock has been successfully installed
and your master pin code has been created
(follow the installation instructions packaged with
your lock), continue with the below steps:
• Remove the lock’s battery cover and batteries.
• Insert the Yale iM1 Network Module into the slot
above the battery compartment. The module has
visible pins that should be located at the bottom
right corner when inserted into the lock.
• Reinstall the batteries and battery cover.
Step 3
Install the Yale iM1 Network Module
Tighten screw
to replace cover
Step 4
• Wake the keypad by touching it with three fingers.
• Enter your master pin code followed by the gear key.
• Tap 7, followed by the gear key.
• Tap 1, followed by the gear key.
Your module has now been successfully enrolled.
Enroll the Yale iM1 Network Module
Step 5
Create Your Home
If you already have a home created, please skip this
step. While holding your phone close to your Yale lock,
open the Yale Secure app. Agree to allow access to
your home data. Tap the + icon in the top right corner
to add your new home. Enter your home name
and tap ‘Add Home’.
Step 6
Add Your Yale Lock to Your Home
Tap the + icon next to your
home name. Your app will
search for your Yale lock.
Tap your Yale lock when
it appears. You’ll then be
asked to scan your
Accessory Setup Code
located on the back of
your iM1 Installation and
Programming Instructions.
You can also choose to
manually enter your code.
In case you misplace this
guide, your code is also
printed on the module itself.
Once the lock has been
added, you’ll be prompted
to rename your lock.
Step 7
Customize Your Lock
Within the lock settings you can customize several
features including Auto Relock, Language, One -Touch
Locking, Operation Mode and more. You can also edit
your lock name at any time. The name of your lock will
be what is used when locking or unlocking with Siri
®
.
For example, for a lock named “Front Door” you could
say, “Siri, unlock my front door.”
Did You Know?
After completing this set-up, you can manage your
Yale lock with iM1 Network Module using the Apple
Home app or Siri voice commands!
SEC-QSG-7_17