Handbuch Manual D GB F E Yakumo Receiver XS DVB-T Digitaler TV-Receiver
Safety Precautions WARNING: • TO REDUCE FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS YAKUMO RECEIVER XS DVB-T TO RAIN OR MOISTURE. • TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK PANEL. THERE ARE NO USERSERVICEABLE PARTS INSIDE. PLEASE REFER TO QUALIFIED SERVICE PERSONNEL. CAUTION:• Do not stack electronic components or other objects on top of the Yakumo Receiver XS DVB-T. The slots on top of the Yakumo Receiver XS DVB-T must be left uncovered to allow airflow to the unit.
Safety Precautions • Keep a clear space around the Yakumo Receiver XS DVB-T to allow for sufficient ventilation. • Use of cloth and mild solution of washingup liquid to clean the casing only when the yakumo receiver xs DVB-T is disconnected from the main power supply. • Do not connect / disconnect or modify cables when the Yakumo Receiver XS DVB-T is plugged in. • Do not cover the Yakumo Receiver XS DVB-T or place it on a unit that emits heat.
Safety Information CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Please carefully study this manual and always keep it available. There are some installation and operation precautions which you should be aware of. 1.Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 2.
Safety Information c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. When the product exhibits a distinct change in performance - this indicates a need for service. 5.
General Information Thank you for purchasing the Yakumo Receiver XS DVB-T. You have just purchased a fully DVB compliant digital terrestrial receiver. All functions can be carried out using the buttons on the remote control, and some of the functions can also be carried out using the buttons on the front panel. Please note that the actual controls and components, menu items, etc. of your Yakumo Receiver XS DVB-T may look somewhat different from those shown in theinstruction manual.
Table of Contents Safety Precautions...........................................................1 Safety Information............................................................3 General Information.........................................................5 Table of Contents.............................................................6 Remote Control................................................................7 Panel Description...........................................................
Remote Control THE INSTRUCTIONS IN THIS MANUAL DESCRIBE THE FUNCTIONS ON THE REMOTE CONTROL. 1. POWER 2. NUMBERS 3. P/N 4. STB/VCR 5. INFO 6. CH+ 7. VOL8. CH9. GAME 10. EXIT 11. 16:9/4:3 12. P13. LANGUAGE 14. MUTE 15. R/L 16. TV/RADIO 17. VOL+ 18. OK 19. EPG 20. TELETEXT 21. MENU 22.
Remote Control 1. POWER: Switch between Operation and Standby modes. Press to change channel or enter your 2. NUMnumeric values on the menu. BERS: Select output mode for TV. 3. P/N: 4. STB/VCR: When VCR is playing, press to switch between VCR and STB; When VCR is closed, press to switch between CVBS and RGB. Display the information about the channel 5. INFO: and program. + Press to change channels or move up in 6. CH : the menus. Let up the volume. 7. VOL-: Press to change channels or move down 8.
Remote Control 14. MUTE: 15. R/L: 16. TV/RADIO: 17. VOL+: 18. OK: 19. EPG: 20. TELETXT: 21. MENU: 22. P+: Press to mute/un-mute audio volume. Setup right or left channel. Press to switch between TV and RADIO. Advance the volume. Press to confirm choices. Display Electronic Program Guide menu. The servicer provided with text message transmitted to TV has Teletext decoder. The default setting is “OFF”, press / and / button enter the Teletext or Teletext Subtitle. Display the main menu.
Panel Description Front Panel 1 2 3 4 1. LED: Red light refers to the Yakumo Receiver XS DVB-T is in standby mode; Green light refers to the Yakumo Receiver XS DVB-T is on; Orange light refers to the VCR send the program to TV. 2. Channel up: Press to change channels or move up in the menus. 3. Channel down: Press to change channels or move down in the menus. 4. Standby button: Press to be (off) in standby mode.
Panel Description Rear Panel 8 1 2 3 4 5 6 7 1.RF IN: Aerial signals input. 2.RF LOOP THROUGH: Output signals to the next Yakumo Receiver XS DVB-T. 3.VCR: Connection to VCR. 4.TV: Connection to TV. 5. AUDIO: Audio signal to Hi-Fi system. 6. Coaxial: Connect the coaxial cable from the coaxial of the Yakumo Receiver XS DVB-T to the wired TV’s jack. 7.RS232: Serial cable connector for downloading data, etc. 8. POWER CABLE: Connect to power source.
Systemic Connection The following figure is a simple guideline for installing the Yakumo Receiver XS DVB-T. If you have any problem about connection and need help, please contact your local dealer. • Install the antenna appropriately. Note: • To avoid damaging the Yakumo Receiver XS DVB-T, please make sure of antenna selecting “Off”, if the sort of antenna is uncertain; then connect the antenna to the Yakumo Receiver XS DVB-T.
Basic Operation Switching Channel When the Yakumo Receiver XS DVB-T is turned on, the default setting is the TV program status. You can switch the current channel using one of the following methods. • Enter your desired channel numeric using the “NUMERICAL(0~9)” buttons to move the channel directly. • Press the “TV/RADIO” button to switch between TV channel and Radio channel. • Press the “OK” button to display Channel list, use the “CH+/CH-” and the “OK” button to select channel.
Guide of Main Menu To display the Main Menu, press the “MENU” button.
Guide of Main Menu Game Mine Tetris GomoKu Calendar Accessory System Information Factory Default System Update Personal Style Menu Color Transparency Level Border Pattern Entry Animation Use the / button to move up or down from one item to another. The corresponding sub menu will be displayed on the TV screen as long as the “OK” button is pressed on the selected item.To escape the menu system at anytime, press “EXIT” or “MENU” button on the remote control.
Guide of Main Menu First Time Installation First Time Installation Do you want to start first time Installation Wizard? YES NO The default setting is “YES”, press either the “EXIT” or “MENU” button on the remote control to exit the dialog. When you press “OK” button on the remote control to select “YES”, and then enter the “First Time Installation(1)” dialog.
Guide of Main Menu First Time Installation (2) Do you want to start Auto search? Previous channel list will be replaced. BACK YES NO BACK: return to the upper menu. YES: start auto search. NO: cancel auto search, and enter the mail menu.
Guide of Main Menu Program List TV Program List Under the main menu, moving / button of remote control to highlight the program list menu, then press the“OK” button to enter the TV Program List, and then will display the following list: No. Program edit table Program Name Favor Move Del The default highlight menu bar is the one on the first line or the one operated lastly. Moving / button of remote control to change the setting.
Guide of Main Menu Music Program List Under the main menu, moving / button of remote control to highlight the program list menu, then press the “OK” button to enter the Music Program List, and then will display the following list: No. Program edit table Program Name Favor Move Del The default highlight menu bar is the one on the first line or the one operated lastly. Moving / button of remote control to change the setting.
Guide of Main Menu Sort Under the main menu, moving / button of remote control to highlight the program list menu, then press the “OK” button to enter the Sort item, a sub-menu will appear on the TV screen. By Name By Service ID By Channel No. To select the desired in the program list, you should firstly display the Program list by directly pressing “OK” button on the remote control at the non-menu mode.
Guide of Main Menu Program Search Under the main menu, moving / button of remote control to highlight the Program Search menu, then press the “OK” button to enter the sub-menu. For beginners, Auto Search is the best choice. First use / button to select Auto item in the program search menu and then press “OK” button to display Auto Search menu. Before here, you should select right country and default by using / button.
Guide of Main Menu Automatic Search Progress 50% Channel No 20 Frequency 546MHz TV List: 000 Music List: 000 You can set parameters in Manual Search if you are familiar with relevant parameters. In this mode, only one TP, whose necessary parameters are set in Manual Search menu by hand, can be searched. Manual Search Channel No 21 Frequency 474.
Guide of Main Menu Parental Control Use parental lock to restrict the viewing of violent and adult oriented scenes by children. You can set the parental lock level in steps as desired.
Guide of Main Menu If you want to know to change Parental PIN , please go to the “Change PIN” item to configure new PIN. Press “OK” button, then a box will appear on the TV screen. Change Parental PIN Old PIN **** New PIN **** Confirm New PIN **** OK Enter the PIN code by using the numeric buttons on your remote control.
Guide of Main Menu System Setting Under the main menu, moving / button of remote control to highlight the System Setting menu, then press the “OK” button to enter System Setting, and then press / button to change country, language etc. Press “OK” button to save your settings. Otherwise, press “EXIT” or “MENU” button to exit the system setting menu without saving.
Guide of Main Menu Time Setting GMT Usage Date Time System Schedule Schedule Task1 Active Task2 inactive Task3 inactive Task4 inactive Task5 inactive Task6 inactive Off/On 2004/01/01 00:42 Detail Mode once(Daily/Weekly/Stop) Start Date 2001/01/01 Start Time 00:00 End Time 00:00 Channel Type TV Channe No. 0001 Note: . GMT is referred to the standard time of Greenwich. If you set date and time manually with numeric buttons on your remote control, the ”GMT usage” item must be set “Off”. .
Guide of Main Menu Game The system provides four games for user’s entertainment. They are Mine, Tetris, GomoKu and Calendar. According to the instruction displayed on the screen, you can enjoy the game using / / / /MENU/OK button. Game Mine Tetris GomoKu Calendar January 2004 Sun Mon Tue Wed Thu 1 4 5 6 7 8 11 12 13 14 15 18 19 20 21 22 25 26 27 28 29 Fri 2 9 16 23 30 Sat 3 10 17 24 31 Using / button to change month; using / button to change year.
Guide of Main Menu Accessory Under the main menu, moving / button of remote control to highlight the Accessory menu, then press the “OK” button to enter a pop-up drop-down parental rating accessory list. System Factory System System Accessory Information System Version: 1.08 Default No/Yes Update update status time out retry 004 Transmission Burn 000% 000% (progress bar) (progress bar) Note: This function of System Update is only provided for the Yakumo Receiver XS DVB-T manufacturer.
Guide of Main Menu Personal Style Under the main menu, moving / button of remote control to highlight the Personal Style menu, then press the “OK” button to enter a pop-up drop-down parental rating personal style list.
Trouble Shooting Before contacting your local service, please check following instructions. If the product does not work normally after completing the following trouble shooting, please contact your local distributor or service center. SYMPTOMS No message is displayed on the CORRECTION • front panel or product has no check the main power cable and check that it is plugged into a power. suitable power outlet. • check whether the power switch is On.
Trouble Shooting SYMPTOMS Poor picture & sound quality CORRECTION • install the antenna in a place • make sure there is no mobile where there is no obstacle. phone or microwave oven near the equipment. • make sure the receiving level, and adjust komma after antenna if the level is low. The receiving level can be influenced by weather. • check the volume level of the TV • check the mute status of the TV and Yakumo Receiver XS DVB-T. and Yakumo Receiver XS DVB-T.
Safety Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Service and Warranty Service In case of technical problems with your Yakumo product, contact our hotline on 00 800 / 92 58 66 00. Warranty If you think that you need to make a claim on your Yakumo product under the warranty, call the hotline on 00 800 / 92 58 66 00. Experienced staff will advise you and arrange how you should proceed.
www.yakumo.
