Datasheet

Chip Resistor Surface Mount
w
ww.yageo.com
Feb. 05, 2013 V.6
Product specification
4
9
SERIES
RC
0603 (RoHS Compliant)
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
terminations (matte tin on Ni-
barrier) are added. See fig.4
DIMENSIONS
TYPE RC0603
L (mm)
1.60 ±0.1
0
W (mm)
0.80 ±0.1
0
H (mm)
0.45 ±0.1
0
I
1
(mm)
0.25 ±0.1
5
I
2
(mm)
0.25 ±0.1
5
Ta ble 1
overcoat
protective glass
resistive layer
(Jumper chip is a conductor)
inner electrode
termination(Ni/matte tin)
ceramic substrate
H
I
2
YNSC056
overcoat
W
L
I
1
inner electrode
O
O
U
U
T
T
L
L
I
I
N
N
E
E
S
S
For dimension see Table 1
Fig. 2 Chip resistor outlines
MARKING
RC0603
No marking
For further marking information, please refer to data sheet “Chip resistors marking”.
Fig. 1 Fig. 1
ynsc007