Datasheet

ManualsBrandsYAGEO ManualsChip SMD ResistorsSMD Resistor 100mW, 220Ohm, 1 %, 0603

DATA SHEE

GENERAL PURPOSE CHIP RESISTORS

RC0603

5%, 1%, 0.5%

RoHS compliant

Product specification – February 05, 2013 V.6 Supersedes Date of Mar. 06, 2003

Summary of content (9 pages)

PAGE 1
Product specification – February 05, 2013 V.6 Supersedes Date of Mar. 06, 2003 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1%, 0.
PAGE 2
Product specification Chip Resistor Surface Mount RC 0603 (RoHS Compliant) SERIES SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC This specification describes RC0603 series chip resistors with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value.
PAGE 3
Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) 3 9 PHYCOMP BRAND ordering codes Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2322 / 2350 XXX XXXXX L (1) TYPE/ START 0603 IN (1) (2) (3) Last digit of 12NC Resistance decade (3) (4) TOL.
PAGE 4
Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) 4 9 MARKING RC0603 No marking ynsc007 Fig. 1 For further marking information, please refer to data sheet “Chip resistors marking”. CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element.
PAGE 5
Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) ELECTRICAL CHARACTERISTICS 5 9 FOOTPRINT AND SOLDERING PROFILES Table 2 RC0603 1/10 W CHARACTERISTICS Operating Temperature Range –55 °C to +155 °C Maximum Working Voltage 75 V Maximum Overload Voltage 150 V Dielectric Withstanding Voltage 100 V For recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting”.
PAGE 6
Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) 6 9 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature Coefficient of Resistance (T.C.R.) IEC 60115-1 4.8 At +25/–55 °C and +25/+125 °C Refer to table 2 Formula: R2–R1 T.C.
PAGE 7
Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) TEST TEST METHOD PROCEDURE REQUIREMENTS Board Flex/ Bending IEC 60068-2-21 Chips mounted on a 90mm glass epoxy resin PCB (FR4) ±(1.0%+0.05 Ω) 3 mm bending Bending time: 60±5 seconds Low Temperature Operation IEC 60068-2-1 Insulation Resistance IEC 60115-1 4.6 This constitutes shall be repeated for 96 hours ±(1.0%+0.05 Ω) for 5% tol.
PAGE 8
Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) TEST TEST METHOD PROCEDURE REQUIREMENTS Intermittent Overload IEC 60115-1 4.39 2.5 times of rated voltage or maximum overload voltage whichever is less for 1 second on and 25 seconds off; total 10,000 cycles ±(1.0%+0.05 Ω) for 1%, 0.5% tol. 8 9 ±(2.0%+0.05 Ω) for 5% tol.
PAGE 9
Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) 9 9 REVISION HISTORY REVISION DATE Version 6 CHANGE NOTIFICATION Feb. 05, 2013 DESCRIPTION - Marking updated - MWV/RCOV updated Version 5 June 29, 2012 - Add 0.