Tiny Traveler ™ Baby Monitor for Your Car BT50424F-1 USER MANUAL ML-50424F_V2
Please register your product warranty at www.letsyada.com IF YOU ARE EXPERIENCING ANY ISSUES WITH THE PRODUCT DURING OPERATION, DO NOT RETURN THE PRODUCT TO THE STORE. CONTACT WINPLUS DIRECTLY FOR INSTRUCTIONS ON HOW TO RETURN/ EXCHANGE THE PRODUCT. PLEASE KEEP YOUR ORIGINAL RECEIPT AS PROOF OF PURCHASE MUST BE PROVIDED. FULL WARRANTY INFORMATION IS INCLUDED IN THIS USER MANUAL. Winplus North America Tel.: 866.294.9244 Email us at: customercare@winplususa.
TABLE OF CONTENTS 1. Introduction ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������2 2. Important Safety information ������������������������������������������������������������������������������������������������������������������������������������������2 3.
1. INTRODUCTION Thank you for purchasing the Yada Tiny Traveler™ Baby Monitor for your car. Yada is dedicated to safe driving practices and strives to limit distractions for drivers. The Yada Tiny Traveler™ is intended to aid in helping drivers traveling with a baby remain focused on driving safely and still have the security of being able to glance at the baby in the back seat. A driver’s main focus should always be on the road and surroundings, with operating the vehicle safely.
• • • • • • • • • • Do not get any of the Tiny Traveler™ components wet or exposed to moisture. At any time, do not attempt to open the monitor or camera, or use different cables other than provided with the original packaging. During installation, do not have the baby in the car. The baby seat should be correctly mounted in the car as required by law. There is no need to have the baby in the car while the Tiny Traveler™ is installed, and should be kept away as a precaution.
3. PACKAGE CONTENTS 1. Tiny Traveler™ Night Vision Camera with 16 Feet/5 Meters Connection Cable 2. Tiny Traveler™ 3.5” Color Monitor 3. Monitor Windshield Mount 4. Mounts for Camera: 4a. Suction Cup 4b. Headrest with Straps 5. 12/24V USB Power Adapter with Cable for Monitor 6. User Manual 1. 2. 3. 4 4a. 4b. 5. 6.
4. PRODUCT SPECIFICATIONS Tiny Traveler™ Monitor • 3.5” TFT color monitor • 5V Tiny Traveler™ Camera • CMOS Sensor • Night vision • VGA image quality • 45 degree view angle • 16 feet / 5 meter cable • Mini USB Plug • 5V 5. INSTALLATION GUIDE MONITOR PLACEMENT i. Take the Tiny Traveler™ Monitor from the packaging and attach the suction cup as shown. ii. Being able to safely glance at your baby should be comfortable and not require you to turn your head from facing forward.
iii. When mounting, you will need to sit in the driver’s seat just as you would while driving, and angle the monitor until it is comfortable to glance at without turning your head away from watching the road. iv. Place the 12/24v Power Adapter in the port on the right side of the monitor.
v. Plug the other end of the Power Adapter into an available 12/24v socket in your vehicle. Please note that the cable should not wrap around the monitor, but should stay to the right of the Monitor and run down the interior on the passenger side of your car. At no time should the Tiny Traveler™ Power or Connection Cable be loose or dangling on the driver’s side of the vehicle. CAMERA PLACEMENT Note that the image in the Monitor will be a reversed image of the baby. i.
• Use the Suction Cup Mount to attach to the rear window or rear-most side glass that is not a door window. For safety, we recommend not mounting to the window of the door. Because there are cables, this can become dangerous when opening the rear or side door. Ensure that the Suction Cup is secured tightly to the window and adjust the Camera to the angle needed. iii.
• Continue to run and tuck the Connection Cable to the front of the car and directly to the Monitor. • Plug the other end of the Connection Cable into the port on the Monitor. Please note that the cable should not wrap around the monitor, but should stay to the right of the Monitor and run down the interior on the passenger side of your car. At no time should the Tiny Traveler™ Power or Connection Cable be loose or dangling on the driver’s side of the vehicle.
6. MAINTENANCE & WARRANTY a. Maintenance • At no time is the Monitor or Camera to become wet or immersed in water. To clean, use a soft cloth to wipe the lens and enclosure. • Do not use alcohol, benzene or thinner to clean the Monitor or Camera. This will cause discoloration. To clean the camera, wipe with a clean cloth dampened with mild cleaner diluted with water and then wipe with a dry cloth. i. Do not stick any foreign object into the ports on the monitor.
• This is a “repair or replace” warranty only, and does not cover the costs incurred for the installation, removal or reinstallation of the product, or damage to any other devices or vehicle. OWNER’S RESPONSIBILITIES: Winplus North America will make every effort to provide warranty service within a reasonable period of time. SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SERVICE, PLEASE CALL TOLL FREE 1.866.294.
Traveler™ and its functioning. Winplus North America and/or its affiliates shall have no responsibility or liability for damage and/or injury resulting from accidents occurring with vehicles having the Tiny Traveler™ installed, and Winplus North America and/or its affiliates, the manufacturer, distributor and seller shall not be liable for any injury, loss or damage, incidental or consequential, arising out of the use or intended use of the product. 7.
communications. However, there is no guarantee that interference will not occur in a particular installation.
This device has been designed to operate with an antenna having a maximum gain of 0 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. IMPORTANT NOTE: IC Radiation Exposure Statements: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
