with 5” Dash Monitor BT54860
TABLE OF CONTENTS 1. Introduction �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������1 2. Package Contents �������������������������������������������������������������������������������������������������������������������������������������������������������������������2 3.
1. INTRODUCTION Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Consult an experienced technician if you are not comfortable installing the product. You can also contact Winplus at 866.294.
2. PACKAGE CONTENTS 1. 6. 2. 7. 3. 8. 4. 9. 5. 10. 1. 5” Dash Monitor 2. 1 Backup Camera 3. 12V/24V Power Adapter for Monitor 4. Hardwire Cable for Monitor 5. Suction Cup Mount for Monitor 6. Install Kit 7. Optional 12V/24V Power Adapter for the Camera 8. User’s Manual 9. Quick Install Guide 10.
3. PRODUCT SPECIFICATIONS 1. 2. 3. 4. Frequency: 2.4GHz Operating Voltage: DC 12V / 24V Operating Temperature: -10~+50°C Maximum Signal Range: 30 feet/10Metres (without Interference or Obstruction) 5. Camera Water Resistance: IP67 rating 4. INSTALLATION GUIDE DASH MONITOR INSTALLATION 1. Stick the Suction Cup Mount on the windshield and adjust to your desired position. 2. Hook the Dash Monitor on to the windshield mount. 3. Remove the Yada Dash Monitor protective overlay. 4. Now power the monitor: a.
BACKUP CAMERA INSTALLATION - Hardwire Power Hardwire cable for Camera Camera cable Reverse Light Power Wires This installation is based on powering the Camera over the reverse tail lights. When installed as directed, the camera image will only appear when the vehicle is in reverse. Caution: This unit is designed to operate on a 12V/24V DC NEGATIVE GROUND electrical system. Connecting to other types of electrical systems will cause damage to your vehicle.
5. At your taillight, remove the light bulb socket from the reverse light housing. 6. Determine the reverse light power wires for your car, designating the positive and negative wires. If you are not sure of which are the power wires, then please contact your vehicle manufacturer or reference a wiring diagram for your vehicle. 7. Connecting the Camera Power Cable: a. Take the open wire end of this cable, and connect it to the power wires of your car (as determined in step 4).
16. Once license plate and Camera are secure, you can adjust the vertical angle of the Camera to your specific need. 17. As a last check, note the position of the view from the Camera when you place the vehicle in reverse. Adjust the angle of the Camera as necessary to achieve the best rear view. WARNING: Do not attach the 12/24V Direct Power Adapter to the Hardwire Adapter at any time. Only one power option can be used with the Camera.
BACKUP CAMERA INSTALLATION – 12/24V Direct Power This installation allows the Camera to be powered via an adapter into any available 12/24V socket. When installed as directed, the camera image will always appear on the monitor screen as long as both are receiving power.* 1. Remove the hard wire power attachment from the Camera Detach Camera cable Hardwire cable for Camera 2. Remove your license plate. 3.
Camera cable Attach 12V/24V Power Adapter for Camera 6. Locate the closest available 12/24V socket and plug in the adapter. 7. Standing with the license plate in one hand and the Camera in the other hand, slide the Camera along the top of the license plate in order to determine the placement. Best placement is in the center of the license plate. If you have a rear hatch handle you may need to remove the Camera bracket, turn the bracket upside down and reattach to the Camera.
recommended that you glance at the image only when in reverse, and use as an aid. Do not rely solely on the camera view to back up. *By using the power button on the Monitor, the image can be shut off while driving. Please remember to turn back on once the vehicle is stopped and ready to reverse. *When running the power cable inside of the vehicle do not close doors or windows on the cable or obstruct it in any way. Video’s are available on www.letsyada.com to see step by step installation instructions. 5.
BRIGHTNESS AND CONTRAST You can adjust the contrast and brightness of the Monitor according to your desired level. Note: Contrast and Brightness setting ONLY works while the camera image is on the screen. TO ADJUST BRIGHTNESS 1. Press “MENU” 2. Go to “Brightness” by pressing “– “ 3. Press “Parking Aid Line” to enter 4. Press “+ “ or “– “ to adjust the contrast level 5. Press “Parking Aid Line” to confirm and exit TO ADJUST CONTRAST 1. Press “MENU” 2. Go to “Contrast” by pressing “– “ 3.
PAIRING The Yada Backup Camera included is already paired with the monitor. If you can not see the Camera image, pair the Camera with the following steps: 1. Turn on your vehicle and place in reverse gear. This will power the Monitor and the Camera. 2. On the monitor: a. Press “Menu” b. Go to “Pair Camera” c. Press “Parking Aid line” to confirm d. The unit is now in pair mode - if the monitor is able to connect with the camera, the display will show “Pair OK”.
6. SAFETY INFORMATION WARNING: A failure to read and follow these warnings and instructions may result in a serious accident, including damaged property or a serious injury, including loss of life. • The Backup Camera is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. However, you, the driver, must use it safely and properly. Use of the Backup Camera is not a substitute for safe, proper and legal driving.
• • • • • • • • • • • • • • • • • Do not strike the Camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock. This product will only provide images of items that are within the field of view of the Camera. Thus, it is imperative that the Camera should be kept clean and unobstructed, and should be mounted so that its field of view includes the entire area behind your vehicle.
SAFETY AROUND AND BEHIND OTHER VEHICLES Using a Backup Camera is not enough to completely overcome a vehicle’s blind spot. Many preventable injuries and deaths occur in driveways or parking lots when drivers do not see children, pets, or others near their vehicles. Here are a few safety tips that will help you to avoid a back-over accident: • Walk completely around your vehicle before getting in. Check for kids, toys, and pets before entering the vehicle and starting the engine. • Know where children are.
defects in material and workmanship for 1 year from the date of original purchase. Where permitted by law, Winplus North America’s liability shall be limited to that set forth in this limited express warranty. This limited express warranty shall be the exclusive remedy of the purchaser and Winplus North America makes no other warranty of any kind aside from the limited express warranty stated above. NOTE: Warranty only applies for North American customers of purchases made in North America.
NOTE: Toll Free # is for North America Customers ONLY. See Customer service section for customer contact numbers for other regions/offices. For customer service and technical support, please call us at 1.866.294.9244 or email us at customercare@winplususa.com. If at that time it is determined that a replacement unit is needed, the support representative will issue a Return Authorization and instruct on how to get a new unit.
any liability for any losses (whether direct or indirect, in contract, tort or otherwise) incurred in connection with the Backup Camera, including but not limited to damaged property, personal injury and/or loss of life. Neither shall Winplus North America and/or its affiliates have any liability for any decision, action or inaction taken by any person in reliance on the Backup Camera, or for any delays, inaccuracies and /or errors in connection with the Backup Camera and its functioning.
preferably in the original shipping box, and freight and insurance prepaid to the following address: ATTN: WINPLUS BLUETOOTH PRODUCTS RETURNS Unit 4, Two Counties Estate, Falconer Road, Haverhill, Suffolk CB9 7XZ, UK 3. Please include a detailed explanation of the problem you are having. 4. If your product is found by Winplus to have a defect in material or workmanship, within the warranty period, it will be repaired or replaced at no charge and returned to you prepaid.
8. GENERAL INFORMATION CUSTOMER SERVICE/CONTACT For questions or issues regarding the product, please visit www.letsyada.com or contact Winplus in your area/region to speak to our customer service representative: Winplus North America Winplus Europe Winplus Australia Winplus New Zealand Winplus Asia Tel.: 866-294-9244 Tel.: 909-752-3074 Tel.: 44-1440-7138888 Tel.: 61-3-8727-7600 Tel.: 64-9-5254575 Tel.: 852-2798-8932 You can also contact us online by visiting www.winplus.
• • • • Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC Rules.
IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
NORTH AMERICA EUROPE AUSTRALIA NEW ZEALAND ASIA www.winplus.com Tel: 866-294-9244 Fax: 310-496-2740 Tel: 44-1440-713888 Fax: 44-1440-713889 Tel: 61-3-8727-7600 Fax: 61-3-9720-4165 Tel: 64-9-5254575 Fax: 64-9-5256817 Tel: 852-2798-8932 Fax: 852-2795-0241 www.letsyada.com © 2014 Winplus North America Inc. All Rights Reserved. Winplus, the logo design, and Yada® are trademarks or registered trademarks of Winplus North America Inc.
