pe] CABER Lifetime Professional Support Dakar customer, Think you very much for supporting SABER] Please read this manual thoroughly before using the projector. If you have any issues, small your order number and the prob ism io Ws will provide a fast solution In 24 hours. Actually, many problems can be easy soiled by chaffing, such as no signal, io sound, blusterous connection falls, WIFI connection Ta lied, dark spots, choppy animation sto.
4 | Projector tens Optical coated grass ions 28 | IR Window Infrared signs! receiver 3 | Air Outset Prevent the projector from investigating 8 | Headphone Ask 3.
Note: 1}install 2 places of AAA batteries into the remote controller before using it Da not combine naw impatiens with old ones in remote controllers, which can cause operation failure due to insufficient power supply. 2) When using the remits controller, passel make sure that the signal transmitter of the ramble controller aims at infrared signal receiver of the projector. 3).
pe] 2 Projector Distance and Size Aspect Reno: 16:0 Distant (ft) Sonora Size 118 120" 144 80 203 a0 The recommended projection distance is about theft shortest projection distance Is 3.51 The image size depends on the distance between projector and screen, there may bs 3% deviation among above listed data Different settings causal various distances Uninstall on the Selling Screw holes A Uploads purchases an universal projector ceiling mount; B.
STARTING PROJECTOR 1)Press the power button on the tamers controller unt! the red light goes off; adjust the focus ring of the projector io get the best image performance; {If 11s 5th: buy, please iy to adjust he projection distance.
pe] Fol ate the focus ing slowly. Al the same ime, check the Tagus point Carey, The bast focus point for the lens would be whee the Image most sear Noe: fit Is steel blurry, pleas try to adjust the projection distance 2. Manual Keystone Correction Manual keystone correction ring Please follow the barrow steps to correct: Adjust the image size to get the best image size by moving the projector back and forth, then rotate the focus ring to get the best focus.
er SETTING UP THE PROJECTOR “The projector's homey page Is as follow. lacteal The Input Signal Rouses Select the desired input signal source (HI NAY) on the home-gaps. 2.088 Disk Insert Mode 2 1 Play Video/Music/PleturefOffice In the USB Disk Insert Mods 1} Insert the USB Distracted the option | MoviaMusicPhoto/Office Sutton.
Function Switch to the previous video. Fast Backward, rewinds the dives back quickly while playing It Play or pass the cent video. Fast Fast, pushes the video move forward quickly whir playing it Suds to ths et video ‘Slack tiv rive when the video sitars. Sal act fhe video isl. Chan the format of the video.
er Bantu Function 4 Switch to the previous music. Bl Flay or pause the caret music bl Switch 1o the next music: & Rap oat the music. EB Select tha music it. o Checks the female uf the music.
pe] 3.1.3108 Cast {for 108 Devices) 1.Tum on the projector, select 10S CAST as the Input source to enter the interface of Screen Mirroring for IOS system 2. Go to the selling of your projector and connect i to your home wil. Sal act your home WIF! to make sirs that the projector connect bo the same wife ts your hons. Press ihe "A" and “V ° on the operation panel of remold controller io select the comets WIFI Press the “UK” key to enter the password page. 3.
Ey py pet 3.2 Ceramicist (for Android Devices} To activate this function, your android device must support ies display. Names may differ from different devices. (This function is only available for ANDROID Devices ) 1. On your Android advice, tap | Settings | -{ ELAN Display § Tum | WI-FE JON 2 Tum on the projector, select Android Cast as the Input Source. 3.
pe] & Projector Settings Get a beater viewing artifact with appropriate settings. The main content of the projection can be satin the following steps. {1} needs selling, first salsa “Settings” on the main screen, and then press the "OK® key on the operation pants. (2) “Network siting”, “Bluetooth setting, “Projection”, *System Update”, “General Setting” san be set. “System Info” can be obtained. Press the and on the operation panel io select ine range of settings. 5.1 Network Setting 1.
pe] 5.2 Bluetooth Setting 1 Move the surest to the "Blustonthy® icon and press OK to enter the Bluetooth setting Interface. 2. Prass "OK" on the "Bluetooth ON/OFF option to tum on and off the Bluetooth function, as shown In the figure below 3 After turning on the Bluetooth function, please scan your Bus tooth devices by clicking the scan key, 4 Scan and Select your Bluetooth devices to connect Io the projector. Press the ®A* add *Y" on the operation pane! is select the erect Bluetooth device.
£3 Projection Se fling §.3.1.Cant Mode: Front, Rear, Front 1.Front projection Celina mount 2 Rear projection Calling mount ow aA 3 Front projection Table mount 4 Rear projection Table mount 5.3.2 Trapezoid Compact: Quadrangle, Vertical quadrangle You can enter the selling of Quadrangles Trapezoid to get a ballet view.
pe] Sap 1: Press the button fo select the [Quadrangle] menu, then press the { OK ] bottom fo enter the sub menu. Step 2: Esp pressing the OK button on the mole controller or projector to select the point Step 3: Press the row keys on the remits controller of projector to adjust he horizontal or vertical parameters, unt the projection screen becomes the desired rectangle.
pe] Step 1: Press the bunion to select the [Verso] menu, then press the | OK] bottom to enter the sub menu Step 2: If the projection image shows as (1), press the [Vertical! trapezoid] on the Remus controller of projector to Increase the vertical parameter unt fo achieve the projection image (2).
5.4 System Update 1 You can online update the system of the projector when you select the Online Update. 2 You can restore to the factory mode by pressing "Restore Factory” if you need to re-soot all settings Pleas refrain from doing this since It may damage the system Note: During the process of restoring factory settings, the projector cannot be powered off or operated, otherwise the system will crash 5.5 General Spiting Mani Function Power on Option You can chives to power ges tendinitis or direct.
SIGNAL LINES CONNECTION SABER C450 projector has 5 interfaces, HOM porpoise inf AUDIO utp. Please select the some connecting port is connect your device (PC, Phone, DVD Player, Sound bar, USB, P84 otc) U5 1.Connect USE Disk 1} insert the USB Disk, Select the caption | MovieMusioPhoto/Dffics Ult] 2) Select the desired fis {or enter the sub folder) In the USE disk, then press the | OK | button to pay it. 2.
pe] 4. Connect to the Bound barf Speaker If your speaker has AUX port, please use your 3 5mm audio cable connect tha projector and your speaker as the picture shows SAFE SHUTDOWN 1.Press the button on the projector or remote controller, then choosiness io power off. 2 Unplug the power cord of the projector. 3.Cover the Lang and store the projector In a cool and dry places. WARRANTY Thank you sa mite for your purchase and support! We provide 3-year warranty for C450 projector.
TROUBLESHOOTING Problems sifted below might some during the operation of your projector. Please refer to the possible factors which might cause the sues to do troubleshooting 4. When turning on the power switch, the indicate light doss not work. 1} The power might not be connected wall. 2) Check the ova-heat protection system. 2. The remote control doss not communicate with the projector.
WARNINGS FCC STATEMENT : This device complies with Part 15 of the FCC Rules, Operation is sublet to the following twe conditions: {1} This device may not cause harmful interference, and {2} This device must accept any interference received, intruding interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority ty operate the equipment.
Correct Disposal of this product Do not dispose this product as unsorted municipal waste, we {lactation of such waste separately for special treatment is necessary, DECLARATION OF CONFORMITY ‘We (Manufacturer is responsible for this declaration) WARNINGS SABER TECHNOLOGIES COL LIMITED, (Company name) Room 4064 Firstborn Building Mantissa International Nectar, Kanchenjunga Sopwith Road, Kantian Street, Long Gang District Sheen, China {Company address declare under our sole responsibility that the product Tra
