àx fxÜ

MILLIVOLT POWER VENT CONTROL MODULE

Connect to Power Vent Cable

Connect to Double Pole Switch Cable

Plug into120v AC Outlet

Connect to TH and TH / TP Tabs on Valve

FIREPLACE IS SUPPLIED

WITH ONE JUNCTION BOX.

ADDITIONAL OUTLETS

MAY BE REQUIRED.

CONSULT A QUALIFIED

ELECTRICIAN.

DOUBLE POLE SWITCH

(SUPPLIED)

NOTE: Double Pole Switch can be replaced

with 120V Double Pole Thermostat. Contact an Electrician for installation.

*In the U.S.A. Thermostats are not permitted for Vented Gas Fireplaces (ANSI Z21.50b-2009 -Decorative).

SWITCH MUST BE “ON” AND POWER VENT BLOWER MUST BE RUNNING FOR APPLIANCE TO OPERATE.

NOTE: MODELS EQUIPPPED WITH MILLIVOLT/ STANDING PILOT IGNITION:

Downward vertical vent runs are NOT permitted.

NOTE: MODELS EQUIPPPED WITH INTERMITTENT PILOT IGNITION:

Downward vertical vent runs are permitted, however, Cold Climate Switch (Standing Pilot

Mode) must not be used.