àx fxÜ

MQRB4436 / MQRB5143 Burner Tube Removal

1. Remove the six [6] DT screws from the lower portion of the Burner Tube Mount Brackets.

2. Slide the Burner Tube away from the Plumbing Connection until it disengages from the orifice.

3. Reverse these steps to reinstall.

MQRB4436 / MQRB5143 Burner System Removal/Installation Guide

-Warning-

Turn off Unit and allow to cool before cleaning. Only a Qualified service technician

should service and repair this appliance.

1. Lift off Valve Access Cover. Remove Valve Heat Shield.

2. Remove the Glass Door from the unit. Loosen Liner Clips in Firebox Top & remove End Panels. Remove DT screws and lift out the

False Bottom.

3. Remove the DT screws around the perimeter of the burner pan.

4. Carefully work the burner pan loose & lift the assembly upward to remove it from the firebox cavity.

5. Installation is the reverse of these steps. Ensure that the mounting surface is clean & fresh Black Mill Pac is used to reseal the

burner pan.