àx fxÜ

MQRB6961 See Thru Framing

MQRB6961SK Kit is required for a See Thru Installation.

Before you begin Framing- Determine whether the Wall Surface will be flush with the face of the fireplace (Fireplace

and wall to be covered with Non-Combustibles, such as tile), or the Framing will be flush

with the face of the fireplace (Flat Wall appearance).

Note: If using optional surround, maximum thickness for non-combustible material is 3/4”.

(Continued)

Framed Opening 71-1/2” x 45-1/2”

Framing style shown is for illustration purposes only.

This structure is NOT load bearing.

[Steel Stud Framing Shown]

Fireplace vent MUST maintain min. 1” clearance from combustible (Wood) framing.

However

if steel stud framin

is used

1” vent clearance is not

uired.

Also refer to these sections:

Clearance to Combustibles

Enclosure Heights

Venting

Note: If Combustible (Wood) Framing Studs

are used, they must be rotated to allow

Min.1” Clearance from Airbox.