User's Manual

23.11.2009
YSQ TERMINAL PROFESSIONAL V3.5 – ADMINISTRATOR’S GUIDE V1.3 [EN] 4/20
1 INTRODUCTION
1.1 PURPOSE OF DOCUMENT
This guide provides the essential information on the installation, configuration and usage of the YSQ Terminal
Professional v3.5 with color display.
You are expected to understand some networking and printing concepts: in particular, you should be familiar
with the client/server paradigm, with IP addressing and TCP/UDP ports. Ideally, you should know something
about LDAP and SNMP as well. It assumes a deeper understanding of YSoft SafeQ on the common administra-
tor level and knowledge of the YSoft SafeQ Administrator Guide. This guide also assumes the ownership and/or
access to articles, such as service cables.
1.2 GOALS AND OBJECTIVES
YSoft SafeQ® Terminal Professional provides user interface for authorization to printer and copier and
workflow improvements such as follow me feature, print job management, self-serve printing and copying and
scan workflow improvements.
1.3 VALIDITY OF DOCUMENT
The information in this guide applies to YSoft SafeQ Terminal Professional version 3.6.2 and newer.
The contents of this guide are up-to-date and apply to the following versions:
YSoft SafeQ® Instant Edition v 3.5
YSoft SafeQ® Professional Edition v 3.1.5
YSoft SafeQ® Enterprise Edition v 3.1.5
1.4 DISCLAIMER
The producer does not bear any responsibility for the use of any functions not specified here unless covered by
a separate document.
The producer rejects any and all responsibility for the consequences of improper, negligent or incorrect
installation or settings of optional operational system parameters.