User's Manual

23.11.2009
YSQ TERMINAL PROFESSIONAL V3.5 – ADMINISTRATOR’S GUIDE V1.3 [EN] 16/20
Power management – four option for touch-screen power management - Disable, Screen dimming, Backlight
completely off, screen completely off
Default backlight – set up backlight intensity
Minimal backlight – set minimal backlight
PM Timeout – define timeout for power management (minutes)
4.10 DIAGNOSTIC UTILS
Picture 10 - Diagnostic utils
Debug mode - enables the debug mode for the terminal (No log by default).
 No log – does not log any information
 Log errors – this option records only error messages in the log
 Log all messages – this option records all messages in the log
Ping – test connection with ping command
Ping server - test connection to the IP address of YSoft SafeQ server
Test server connect - test connection between terminal and YSoft SafeQ server
4.11 SERVICE