User's Manual

23.11.2009
YSQ TERMINAL PROFESSIONAL V3.5 – ADMINISTRATOR’S GUIDE V1.3 [EN] 11/20
Picture 2 - Service menu
4.3 NETWORK SETTINGS
Picture 3 - Network settings
Uplink interface – set up IP address of terminal, netmask, ports speed and network adapter mode (for use of
normal UTP cable or crossed UTP cable)
Downlink interface – define speed and network adapter mode for each port
DHCP – enable or disable DHCP
Gateway – define gateway for terminal (option is grayed if DHCP enabled)
DNS server – define DNS for the terminal (option is grayed if DHCP enabled)