making the MFDs think™ YSQ Terminal Professional v3.5 Administrator’s Guide Version 1.
3.11.2009 © 2010 by YSoft Corporation All rights to this document, domestic and international, are reserved by YSoft Corporation. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without prior written permission of YSoft.
23.11.2009 TABLE OF CONTENTS Table of Contents .................................................................................................................................................... 3 1 Introduction ................................................................................................................................................... 4 1.1 Purpose of document ..........................................................................................................................
23.11.2009 1 1.1 INTRODUCTION PURPOSE OF DOCUMENT This guide provides the essential information on the installation, configuration and usage of the YSQ Terminal Professional v3.5 with color display. You are expected to understand some networking and printing concepts: in particular, you should be familiar with the client/server paradigm, with IP addressing and TCP/UDP ports. Ideally, you should know something about LDAP and SNMP as well.
23.11.2009 Information to user: The user that makes changes or modifications not expressly approved by the party responsible for compliance (Y Soft Corporation) could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
23.11.2009 2 OVERVIEW The YSQ Terminal Professional has a graphic touch-screen and is equipped with a four-port network adapter. Picture 1: YSoft SafeQ Terminal Professional It also features a microcomputer, flash ROM, network interface and a card reader. The card reader is optional, as PIN code can be used for authentication instead of cards. Terminal is supplied with an external power supply (included in the package).
23.11.
23.11.
23.11.2009 FLASH memory 16MB Blocking cables to MFD YES Internal operating system LINUX Customization option YES/as required YSQ TERMINAL PROFESSIONAL V3.5 – ADMINISTRATOR’S GUIDE V1.
23.11.2009 4 TERMINAL SETTING 4.1 TERMINAL CONFIGURATION - COMMON 4.
23.11.2009 Picture 2 - Service menu 4.
23.11.2009 4.
23.11.2009 Card reader – choose the type of card reader installed Card reader test – place a card and see card number on the terminal screen Fingerprint reload – support for biometric login Fingerprint clear – consult Ysoft SafeQ Fingerprint technical specification for more details 4.
23.11.
23.11.2009 Main menu after P/C – enabling of displaying Main menu after the the print / copy session is finished. Applicable only for terminals with readers, those are capable of ensuring card presence. enabled – re-login is forced to server after print / copy operation finished. Terminal returns to the Main menu (user´s card must be still present at the reader). Only way to end session is to click END button in the Main menu.
23.11.2009 Power management – four option for touch-screen power management - Disable, Screen dimming, Backlight completely off, screen completely off Default backlight – set up backlight intensity Minimal backlight – set minimal backlight PM Timeout – define timeout for power management (minutes) 4.10 DIAGNOSTIC UTILS Picture 10 - Diagnostic utils Debug mode - enables the debug mode for the terminal (No log by default).
23.11.2009 Picture 11 - Service Reboot – reboot the terminal Emergency update – run an emergency firmware update from YSoft SafeQ server Change PIN – change service menu access PIN code (“customer level” PIN) Change part. PIN – change service menu access PIN code ( “partners level” PIN YSQ TERMINAL PROFESSIONAL V3.5 – ADMINISTRATOR’S GUIDE V1.
23.11.2009 5 CONCLUSION In this document you got acquainted with the installation procedures of Ysoft SafeQ Terminal Professional v3.5. For other information about setting up of terminal on SafeQ server consult SafeQ - Administrators Guide, which you can download along with other newest manuals on the Partner’s Portal. Partner‘s Portal web page: http://www.ysoft.com/partner-network/log-on-to-partner-portal/ YSQ TERMINAL PROFESSIONAL V3.5 – ADMINISTRATOR’S GUIDE V1.
23.11.2009 6 RELATIONSHIP WITH OTHER DOCUMENTS This section describes how this guide is related to other documentation: Nr. Document Version Author 1. YSQ Terminal Professional v3.5 – Service Guide [EN] 1.1 RMU 2. YSQ Terminal Professional v3.5 – User’s Guide *EN+ 1.3 RMU 3. 4. 5. 6. 7. YSQ TERMINAL PROFESSIONAL V3.5 – ADMINISTRATOR’S GUIDE V1.
23.11.2009 7 VERSION HISTORY Document author/owner: YSoft Corporation Version Date Change Status Accepted Author 0.1 06/2009 Initial version 1.0 06/2009 Creation 2 separates documents – Service Guide and Administrator’s Guide Final PNE 1.1 09/2009 Chapter 1 update (disclaimer added) Final PNE 1.2 09/2009 Chapter 4.7 update (new menu options description) 1.3 11/2009 Chapter 1 and Chapter 4.7 update Final PNE 1.4 07/2010 Added FCC statement warning (Chapter 1.
