User's Manual

USB Card Reader v3 Administrator’s Guide
YSoft SafeQ 6
12 of 15
Picture 10 - Saving of changes after protocol change
6.1. Card reader testing screen
Card testing screen menu can be started by number 100 from the main menu. See Picture 6 – Main menu.
When testing window will appear you can test the reader by placing a card above the reader.
Picture 11 - Test card window 1
Reader should display result from reading inside this window like example on the Picture 12 - Card testing
result.
Picture 12 - Card testing result
Multiple card readers can be tested at once. The screen automatically recognizes disconnected and newly
connected readers so it may be used for mass-production card reader testing.
If the connected reader supports card presence detection then the card number and type is visible only
when the card is placed at the card reader.
If the connected reader does not support card presence detection, a "tmout" is displayed.