User's Manual

USB Card Reader v3 Administrator’s Guide
YSoft SafeQ 6
11 of 15
6. Action 3 - Setting card reader protocol
When you are on the main page select appropriate number of the reader. If you want to change card reader
protocol for specified reader type (selected number), then you need to open the value 3 "Set card reader
protocol"
Picture 8 - Selecting of card reader
To choose appropriate reading protocol, please see Y Soft Card Readers Protocols.pdf for more details
about card reader protocols. This*. pdf file is always attached to the zip file with released FW of the USB
reader.
Select the number and confirm by "enter" confirmation.
Picture 9 - Reader protocol confirmation
After selecting the appropriate number of protocol, you will be navigated to submenu page, when you need
to save currently changed settings. Select "99" to save settings for changed reading protocol and confirm.