User's Manual
Table Of Contents
USB Card Reader v3 Administrator’s Guide
YSoft SafeQ 6
9 of 15
5. Card reader configuration screen
When administrator selects the number of the reader from the reader list, the reader configuration screens
will be shown with general information about reader and following steps for next administration:
Picture 7 - Reader configuration screen
Action 1 sets the USB reader configuration to defaults. This includes USB mode, reader protocol,
debug mode and other parameters. This option does not format data that are stored on USB reader
internal file system.
Action 2 sets USB mode. This option is available onlyfor specific OEM USB reader type. Available
usb modes are described in chapters 4.2.1 and 4.2.2.
Action 3 sets card reader protocol. For some card readers it is necessary to enable support for
another card types. Default card reader protocol is 0 which means that the reader default protocol will
be used. If invalid card reader protocol is selected then the default protocol will be used.