User's Manual

Chapter 5. Changing settings
44 YYSOFT SAFEQ TERMINAL PROFESSIONAL INSTALLATION AND ADMINISTRATION GUIDE
Show P/C summary
Select the information that the terminal displays when a print/copy operation is
complete, before the print/copy session ends:
Pages only – The terminal displays only the number of pages.
Pages and price – The terminal displays the number of pages and the price.
Disabled – The terminal does not display any information.
Enter Project ID
Yes – The user can enter a project ID. The terminal does not initially display the
project list. However, if the user enters the first digit of a project ID, the
terminal then displays all the projects that begin with that digit. For example, if
the user enters 22, the terminal displays all the projects beginning with 22.
No – The user does not need to enter a project ID; the terminal displays all the
project IDs.
Copy timeout sound
NOTE: Sound must be enabled for this option to work. See page 42.
Select Yes for the terminal to emit a sound when the specified maximum
amount of time for a copy session is reached. (See "Copy dialog timeout.")
Select No for the terminal to remain quiet when the specified maximum amount
of time for a copy session is reached.
Menu dialogs timeout
Select the maximum length of time with no user input the terminal will display
menus:
10 seconds
30 seconds
60 seconds
None—No timeout. Applicable only if the terminal includes a specific card
reader and the user is logged in with a card.
NOTE: "None" is supported only by Smartcard reader, Mifare reader in
Continuous mode, or HID Continuous reader.