User's Manual

October 13, 2014
Using Terminal UltraLight CONFIDENTIAL 9
4 LOGGING IN AT THE PRINTER
To use the YSoft SafeQ functions at the printer, you must first log in. The method you use depends on how
the system is set up at your location.
Your system may be configured so that you can choose to log in either with a PIN or a card.
1 To log in, Place your ID card on the terminal as shown here.
OR
2
Press the keys to enter your PIN (2 to 8 numbers); then press .OK
If authentication is successful:
You can now use the printer.
If authentication is unsuccessful:
This LED sequence indicates that the terminal did not recognize
your ID card:
Place the card again. If authentication is still not successful, contact your SafeQ administrator.
4.1 LOGGING OUT
To log out, touch the button or button on the terminal or (if available).X OK swipe any card