User`s manual

USB Hexa Media Drive Users Manual 149313-02 Rev. D
Page 36
6) Uninstalling the driver software.
To uninstall the driver software, run “Install.exe” from the Driver CD-ROM. You can also
uninstall the driver software by selecting it in the Control Panel's Add/Remove
Programs.
3.7. Restrictions for Windows
1) Formatting a memory card
Do not format (initialize) memory cards on Windows. If you format a memory card on
Windows, it may not be available for devices such as digital cameras due to the
difference of the format type (FAT size, cluster size, Hard Disk Type or Super Floppy
Disk type). If you use a digital camera, format memory cards with it.
2) USB hub
The USB HMD requires 500 mA supplied from the USB port. If you connect the HMD to
a USB hub, use a self-powered hub with an AC adaptor. Do not connect it to a bus-
powered hub such as a USB port on the keyboard. If you use a bus-powered hub, the
USB HMD will not operate because it does not provide power required to operate the
USB HMD.
3) Startup (booting).
You cannot start up your PC from the USB HMD. Some PCs may not start up if a
Compact Flash or Microdrive is inserted at startup (power-on). Do not insert any
memory card before startup.
4) Custom Drive Tool
For Windows XP, if you start up the OS with the USB HMD connected, memory card
drive labels may be displayed as generic “removable drive”. In this case, disconnect the
USB HMD once. Then connect the USB cable. The correct drive labels will be
displayed.
5) Standby
For Windows XP, if you disconnect USB devices during standby, they may not operate
after recovery from standby. Do not disconnect USB devices during standby. If a
problem occurs, restart the OS.