User`s manual

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 35

4) Disconnecting the USB cable

For Windows Me, Windows 2000, and Windows XP, before disconnecting the USB cable,

click the

Unplug or Eject Hardware icon on the task tray to remove the device, and then

disconnect the USB cable. For Windows Me, memory cards are displayed as four

independent drives; remove all of them.

Windows 98 does not have the

Unplug or Eject Hardware icon on the task tray. Check

that the HMD is not being accessed and then disconnect the USB cable.

NOTE: Do not disconnect the USB cable during access.

5) Standby

Although this product supports the Windows standby mode, we recommend that you

remove all memory cards before standby. Depending on your version of Windows or the

model of your PC, a malfunction may occur. In this case, before standby, remove all

memory cards and then disconnect the USB cable. During standby, do not insert/remove

media or connect/disconnect the USB cable.

NOTE: Do not initiate standby mode during access.

Click

Disconnect USB cable.