User manual

Page 75
6.9.4 Backup and Reset
Allows you to reset the camera to factory defaults, backup the configuration in case of accidental reset and restore
settings from a backup.
[Reset] Click Reset to initialize the Y-cam to default factory settings. All users and settings will be lost, requiring you to
reconfigure the camera.
[Backup] Click Backup to back-up the current configuration of the Y-cam for future reference. Once you have your
camera setup as you require, this is recommended.
To restore a backup file:
[Browse...] Click Browse... to search for a backup configuration you wish to upload to the camera, then click Restore.
Note: Do not turn off the power during the Restore function since this might corrupt the camera’s firmware