User manual

The Y-cam White can upload an image to an FTP server upon receiving an alarm from the motion

detector window or at specific time intervals.

FTP is a commonly used protocol for exchanging files over any network or internet and there are a

number of FTP providers which will allow you to upload the images free of charge.

The Y-cam can be configured with 4 different FTP servers. These servers can be individually connected

to either upload on motion detection or upload periodically. (See section 8.3 and section 8.4 of this manual for

further details)

8.5 FTP Servers

[FTP Server ID] Select the ID, you can connect to up to four FTP Servers .

[FTP server name] Type the name or IP address of the FTP server.

[FTP server port] The port number of the FTP server (default is 21).

[Anonymous] Enable or disable anonymous login.

[User name] Type your user name

[Password] Type your password

[Re-type password] Re-type your password

[Passive mode] Switch passive mode on or off.

[Keep Alive] Time period for which camera should be connected to the FTP server. The camera will

keep the connection with the server for the specified number of seconds after the last upload.

Click Apply to confirm your settings.