User manual

8.3 Alarm Management

[Alarm Mode] Activate/ Deactivates the motion detection alarm.

[FTP Alarm Management] Enable/Disable uploading of images on motion detection to an FTP Server.

[Trigger Time] The number of seconds that the camera should keep sending images when an alarm

is triggered.

[Trigger FPS] The number of frames per seconds that the camera should keep sending images at

when an alarm is triggered.

[FTP Server ID] Select the FTP Server number from the list. (See section 8.5 of this manual for further details)

[Remote path] Path where to save the image file on the FTP server.

[Snapshot From] Select the stream from which it should get the snapshot. (See section 7.12 of this manual for

further details on how to setup the various video streams)

[Image file name] A name for the Image.

[Suffix of file name] Image file name suffix can be either date and time or a sequence number.

[Effective Period]

[Always] Always trigger the alarm upon motion detection

[Schedule] Trigger the alarm according to the schedule (See section XX.X of this manual for further details)

Click Apply to confirm your settings.