User manual

From the home page click settings and enter the administrator user name and password. Click on

Camera Setup under the title Camera to change the image and audio parameters of the camera.

[Frequency] Two options: 50Hz & 60Hz. Set according to the mains frequency in the country of use.

For UK this would be 50Hz.

[Image rotation] Display images upside down.

[Moonlight Mode]

[Power LED light] Turn the Y-cam White front LED On or Off during normal operation.

[Show FPS in ActiveX] Show FPS in ActiveX Bar.

[Microphone] Turn on/off the built-in microphone.

[Mic volume] Adjusts the sensitivity of the microphone from 0~14 where 0 is the lowest.

[Audio bit rate] Four options: 16, 24, 32, 40(kbps). Determines the quality of the audio being transmitted.

Click Apply to confirm your settings.

7.1 CAMERA

7.11 Camera setup