User manual

9.5 Backup and Reset

Note:

Do not turn off the power during the Reset, Backup or Restore functions sice this might corrupt the camera’s firmware

Tip:

The camera can also be reset to the default settings by pressing the reset switch on the side of the camera.

[Reset] Click Reset to initialize the Y-cam Knight to default factory setting. All users and settings will be

lost, requiring you to reconfigure the camera.

[Backup] Click Backup to backup the current configuration of the Y-cam Knight for future reference.

[Browse...] Click Browse... to search for a backup configuration you wish to upload to the camera, then

click Restore.