User manual

8.3 FTP Alarm Setup
.
NOTE: the above settings are for testing and illustration purposes only. If you require the password for
this account in order to test the operation of the camera please e-mail us on [e-mail]
Most of the above settings are not the default settings of the Y-cam.
[Motion detection] Enable or Disable FTP upload upon motion detection.
[Periodical send] Enable or Disable FTP upload periodically.
[Interval time] Type the interval at which you want to upload the image.
[FTP server name] Type the name or IP address of the FTP server.
[FTP server port] The default port number is 21.
[Anonymous] Enable or disable anonymous login.
[User name] Type your user name
[Password] Type your password
[Re-type password] Re-type your password
[Passive mode] Switch passive mode on or off.
[Remote path] Path where to save the image file on the FTP server.
Click Apply to confirm your settings.
30
The Y-cam Knight can also upload an image to an FTP server upon receiving an alarm from the motion
detector window or at specific time intervals.
FTP is a commonly used protocol for exchanging files over any network or internet and there are a
number of FTP providers which will allow you to upload the images free of charge.
Eg. http://free.prohosting.com would have the following settings for account name “ycamuk” uploading an
image every 1 hour 1 minute 10 seconds i.e. Every 3670 seconds.