User manual

8.0 ALARM

8.1 Motion Detection

Motion Detection can trigger an alarm that sends images or video feed via e-mail or FTP (File Transfer

Protocol). You can set up to four different Motion Detection windows.

[Window] Check this box to enable the window.

[Threshold] Set the threshold bar to the amount of motion required to trigger the alarm.

[Sensitivity] Set the measurable difference between two sequential images that would indicate motion.

Note: Sliding the Sensitivity bar to the left will decrease the sensitivity of the motion detection i.e. ‘More’

movement is required to trigger the alarm.

When making any changes please click “Apply” before testing since otherwise the old settings would still

Active.

Note:

1. When you enable, disable, relocate or resize a window click Apply to for the new

settings to be enable.

2. Only the checked window area will trigger the alarm.

3. Moving the Threshold bar to the left or the Sensitivity bar to the right will increase the

sensitivity of when the alarm is triggered.

4. To resize a window simply drag one of its corners.

5. To move a window click and drag on the top bar of the window (window name).

Checked the window box to enable this window.

Threshold bar and indicator