User manual

7.6 UPnP Setup

Y-cam supports UPnP which is enabled by default. This function requires a Windows XP/Vista operating

system. It is a quick way to discover the Y-cam Knight on your network. Please make sure that the UPnP

function is enabled on your PC.

[UPnP] Enable or disable the UPnP function.

[Router external port] Using this port, automatically adds a port forwarding rule to a router via UPnP

protocol. Please note that not all routers support this function. Refer to your router manual for further

details.

If select UPNP Enable, and set port range is 8150 to 8350, camera will ask router to add a port

forwarding rule automatically. In this rule, the internal port is camera default port 80, the external port is

8150, IP address is camera's IP. Through this setting, users can visit the camera from Internet through the

router with this URL http://routeripaddress:8150.

If there are several cameras in Local Network, the first one to be connected will use 8150 as external

port, and second one will use 8151, third one use 8152, etc. Every camera will remember its port, it will

preferentially use this port in next power on.

Click System at the top right of Settings page to show the System information (see Section 10.2 of this manual

for further details)

Click Apply to confirm and save your setting.